When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer
a solution, refer to the pages given for each problem.
Problems relating to images
• "No images appear" s p.63
Projection does not start, the projection area is completely black, the
projection area is completely blue, and so on.
• "Moving images are not displayed" s p.63
Moving images being projected from a computer appear black and
nothing is projected.
• "Projection stops automatically" s p.63
• "The message "Not Supported." is displayed." s p.64
• "The message "No Signal." is displayed." s p.64
• "Images are fuzzy or out of focus" s p.64
• "Interference or distortion appear in images"
s
p.65
Problems such as interference, distortion, or black & white checked
patterns appear.
• "The image is truncated (large) or small, or the aspect is not suitable" s p.65
Only part of the image is displayed, or the height and width ratios of the
image are not correct, and so on.
• "Image colors are not right" s p.66
The whole image appears purplish or greenish, images are black & white,
colors appear dull, and so on... (Computer monitors and LCD screens
have different color reproduction performance, so that the colors
projected by the projector and the colors appearing on the monitor may
not necessarily match, but this is not a sign of a problem.)
• "Images appear dark" s p.66
Problems when projection starts
• "The projector does not turn on" s p.67
Other problems
• "No sound can be heard or the sound is faint" s p.67
• "The Remote Control does not work" s p.67
• "I want to change the language for messages and menus" s p.68
Problem Solving
62
To Next Page
Loading...
Need help?
General
