Epson ET-2550 User Manual

8. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
9. Press the OK button to exit.
You see either an AP or D connection symbol on the LCD screen and should be able to print directly
to your product from your computer or device.
Note: If the AP or D connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not
enabled. Repeat these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi Networking
Using WPS to Connect to a Network
If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect
your product to the network.
1. Press the WPS button on your router.
2. On the product, press the home button, if necessary.
34

Epson ET-2550 Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Connectivity	Wi-Fi, USB
Functions	Print, Copy, Scan
Maximum Copying Resolution	600 x 600 dpi
Duplex Printing	Manual
Ink Colors	Black, Cyan, Magenta, Yellow
Display	1.44-inch color LCD
Operating Systems	Windows, Mac OS
Paper Sizes	Letter, Legal
Paper Capacity	100 sheets
Weight	11 lbs
Mobile Printing	Apple AirPrint, Google Cloud Print
Print Speed (Black)	9.0 ISO ppm
Print Speed (Color)	4.5 ppm (ISO)
Ink Type	EcoTank Ink