Transporting the Printer
When you need to transport the printer to move or for repairs, follow the steps below to pack the printer.
c
Important:
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ When storing or transporting an ink bottle aer removing its seal, do not tilt the bottle and do not subject it to
impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely.
Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking
when you transport the bottle.
❏ Do not put opened ink bottles in the box with printer.
1. Turn o the printer by pressing the
P
button.
2. Make sure the power light turns o, and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is o. Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4. Remove all of the paper from the printer.
5. Make sure there are no originals on the printer.
User's Guide
Appendix
119
To Next Page
Loading...
Need help?
General
