Epson LX-350 User Manual

Home > Printer Software
Printer Driver Settings Overview
Printer settings
Monitoring settings
Setting Utility
The following tables show the Windows printer driver settings. Note that not every setting is available in all versions of
Windows. For more details, see Help for the printer driver.
Printer settings
Settings Explanations
Paper Size Select the size of the paper you want to use. If you do not see your paper size,
use the scroll bar to scroll through the list. If your paper size is not included in
the list, see Definition of Custom Paper Size for instructions.
Orientation Select Portrait or Landscape.
Paper Source Select the paper source you want to use.
Graphic - Print Quality Select the printing resolution you want. The higher the resolution you select, the
more detailed your printout will be; however, increasing the resolution slows
printing.
Halftoning Select the type of halftoning to use when printing graphics. To let the printer
determine the best halftone quality, use Auto Select.
Printer Font Setting Select a character table group to use. You can select one of three character table
groups, Standard, Expanded, and None (bit image printing).
When Standard or Expanded is selected, the printer uses the device fonts.
Expanded includes more fonts than Standard.
When None is selected, the printer uses bit map images instead of the device
fonts.
For details on the fonts which are included in each table, see your printer’s
documentation.
Page Order* Select whether to print from front to back or back to front.
Pages Per Sheet* Select the number of pages that you want to print onto a single page.
Copy Count* When you select more than one in the Number of copies box, this check box
appears and you can select whether to collate the pages of the copies.
Advanced Printing Features* Select Enable or Disable for the metafile Spooling.
Print Optimizations* Select Disable when the printer does not use the device fonts and select Enable
when the printer uses the device fonts.
Printable Area If Standard is selected, the normal printable area for Epson impact printers is
used.
If Maximum is selected, the printer’s maximum printable area is used.
Top Margin Priority Select which setting for the print-start position is to be used; driver setting or
printer setting. For more details, see Help for the printer driver.
Packet Mode Ordinarily, there is no need to change this setting. If you change the printer’s
Packet Mode settings, change this setting to match. If the printer and printer
driver settings are different, you may not be able to print correctly. For more
details, see Help for the printer driver.
User Defined Paper If your paper is not included in the Paper Size drop-down list, you can add the
size to the list. For more details, see Help for the printer driver.
Offset This setting allows you to offset the image on the page. That is, you can adjust
the position of the printed image. If the offset you specify moves a portion of the

Epson LX-350 Specifications

General

print speed (draft high-speed)	347 cps (10 cpi), 357 cps (12 cpi), 390 cps (15 cpi)
print speed (draft high-speed condensed)	383 cps (17 cpi), 298 cps (20 cpi)
print speed (draft)	260 cps (10 cpi), 312 cps (12 cpi), 223 cps (15 cpi)
print speed (draft condensed)	222 cps (17 cpi), 260 cps (20 cpi)
print speed (draft in bold)	130 cps (10 cpi)
print speed (near letter quality)	65 cps (10 cpi), 78 cps (12 cpi), 55 cps (15 cpi), 47 cps (17 cpi), 56 cps (20 cpi)
column width	80 cpl (10 cpi), 96 cpl (12 cpi), 120 cpl (15 cpi), 137 cpl (17 cpi), 160 cpl (20 cpi)
cut sheets width	3.9 ~ 10.1" (100 ~ 257 mm)
cut sheets length	3.9 ~ 14.3" (100 ~ 364 mm)
cut sheets thickness	0.0025 ~ 0.0055" (0.065 ~ 0.14 mm)
multiple forms width	3.9 ~ 10.1" (100 ~ 257 mm)
multiple forms length	3.9 ~ 14.3" (100 ~ 364 mm)
multiple forms thickness	0.0047 ~ 0.015" (Total) (0.12 ~ 0.39 mm)
envelopes (No.6) width	6.5" (165 mm)
envelopes (No.6) length	3.6" (92 mm)
envelopes (No.6) thickness	0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
envelopes (No.10) width	9.5" (241 mm)
envelopes (No.10) length	4.1" (105 mm)
envelopes (No.10) thickness	0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
continuous forms width	4.0 ~ 10.0" (101.6 ~ 254.0 mm)
continuous forms length (per sheet)	4.0 ~ 22.0" (101.6 ~ 558.8 mm)
continuous forms thickness	0.0025 ~ 0.015" (Total) (0.065 ~ 0.39 mm)
paper roll holder width	8.5" (216 mm)
paper roll holder thickness	0.0028 ~ 0.0035" (0.07 ~ 0.09 mm)
copies	1 original + 4 copies
format space between lines	1/6" (4.23 mm) or programmable in increments of 1/216" (0.118 mm)
voltage	AC 120 V / AC 220 - 240 V
frequency	50 Hz / 60 Hz
power consumption	27 W (ISO/IEC 10561 Letter pattern)
power consumption in sleep mode	Approx. 1.1 W
power consumption in powered off mode	0 W
power consumption in auto off mode	Approx. 0.3W
temperature	41 ~ 95°F
humidity	10 ~ 80% RH
mean time before failure	10, 000 POH (at 25% duty)
print head life	400 million strokes/wire
sound level	Approx. 53 dB(A) (ISO 7779 standard)
interfaces	Bidirectional parallel (IEEE-1284), USB high speed (ver 2.0), Serial
input buffer	128KB

Weight and Dimensions

width	14.25" (13.7" without knob)
depth	10.83"
height	6.06"
weight	9.04 lb