Epson LX-350 User Manual

Home > Control Panel
About Your Printer’s Default Settings
Default Setting mode
Changing default settings
The default settings control many printer functions. While you can often set these functions through your software or printer
driver, you may sometimes need to change a default setting from the printer’s control panel using the Default Setting mode.
Default Setting mode
The following table lists the default settings and the options you can select in the Default Setting mode. The settings are
explained in detail after the table. For instructions on changing the default settings, see Changing default settings.
Item
Setting / value
*1
Page length for tractor 3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch,
11inch, 70/6inch, 12inch, 14inch, 17inch
Skip over perforation Off, On
Auto tear off Off, On
Auto line feed Off, On
Print direction Bi-D, Uni-D
Software ESC/P, IBM PPDS
0 slash 0,
I/F mode Auto, Parallel, Serial, USB
Auto I/F wait time 10 seconds, 30 seconds
Baud rate 19200, 9600, 4800, 2400, 1200, 600, 300 BPS
Parity None, Odd, Even, Ignore
Data length 8 bit, 7 bit
Parallel I/F bidirectional mode Off, On
Packet mode Auto, Off
Character table
*2
Standard model:
Italic, PC 437, PC 850, PC 860, PC 865, PC 861, PC 863,
BRASCII, Abicomp, Roman 8, ISO Latin 1, PC 858, ISO 8859-15
All other models:
Italic, PC 437, PC 850, PC 437 Greek, PC 853, PC 855, PC 852,
PC 857, PC 866, PC 869, MAZOWIA, Code MJK, ISO 8859-7, ISO
Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT, PC
866 UKR, PC APTEC, PC 708, PC 720, PC AR864, PC 860, PC 865,
PC 861, PC 863, BRASCII, Abicomp, Roman 8, ISO Latin 1, PC
858, ISO 8859-15, PC 771, PC437 Slovenia, PC MC, PC1250,
PC1251, KZ1048
International character set for Italic table Italic U.S.A., Italic France, Italic Germany, Italic U.K.,
Italic Denmark1, Italic Sweden, Italic Italy, Italic Spain1
Pitch 10CPI, 12CPI, 15CPI, 17CPI, 20CPI, Proportional
Auto CR (IBM PPDS)
*3
Off, On
Manual feed wait time 0.5 second, 1 second, 1.5 seconds, 2 seconds
Buzzer Off, On
Low-noise mode Off, On

Epson LX-350 Specifications

General

print speed (draft high-speed)	347 cps (10 cpi), 357 cps (12 cpi), 390 cps (15 cpi)
print speed (draft high-speed condensed)	383 cps (17 cpi), 298 cps (20 cpi)
print speed (draft)	260 cps (10 cpi), 312 cps (12 cpi), 223 cps (15 cpi)
print speed (draft condensed)	222 cps (17 cpi), 260 cps (20 cpi)
print speed (draft in bold)	130 cps (10 cpi)
print speed (near letter quality)	65 cps (10 cpi), 78 cps (12 cpi), 55 cps (15 cpi), 47 cps (17 cpi), 56 cps (20 cpi)
column width	80 cpl (10 cpi), 96 cpl (12 cpi), 120 cpl (15 cpi), 137 cpl (17 cpi), 160 cpl (20 cpi)
cut sheets width	3.9 ~ 10.1" (100 ~ 257 mm)
cut sheets length	3.9 ~ 14.3" (100 ~ 364 mm)
cut sheets thickness	0.0025 ~ 0.0055" (0.065 ~ 0.14 mm)
multiple forms width	3.9 ~ 10.1" (100 ~ 257 mm)
multiple forms length	3.9 ~ 14.3" (100 ~ 364 mm)
multiple forms thickness	0.0047 ~ 0.015" (Total) (0.12 ~ 0.39 mm)
envelopes (No.6) width	6.5" (165 mm)
envelopes (No.6) length	3.6" (92 mm)
envelopes (No.6) thickness	0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
envelopes (No.10) width	9.5" (241 mm)
envelopes (No.10) length	4.1" (105 mm)
envelopes (No.10) thickness	0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
continuous forms width	4.0 ~ 10.0" (101.6 ~ 254.0 mm)
continuous forms length (per sheet)	4.0 ~ 22.0" (101.6 ~ 558.8 mm)
continuous forms thickness	0.0025 ~ 0.015" (Total) (0.065 ~ 0.39 mm)
paper roll holder width	8.5" (216 mm)
paper roll holder thickness	0.0028 ~ 0.0035" (0.07 ~ 0.09 mm)
copies	1 original + 4 copies
format space between lines	1/6" (4.23 mm) or programmable in increments of 1/216" (0.118 mm)
voltage	AC 120 V / AC 220 - 240 V
frequency	50 Hz / 60 Hz
power consumption	27 W (ISO/IEC 10561 Letter pattern)
power consumption in sleep mode	Approx. 1.1 W
power consumption in powered off mode	0 W
power consumption in auto off mode	Approx. 0.3W
temperature	41 ~ 95°F
humidity	10 ~ 80% RH
mean time before failure	10, 000 POH (at 25% duty)
print head life	400 million strokes/wire
sound level	Approx. 53 dB(A) (ISO 7779 standard)
interfaces	Bidirectional parallel (IEEE-1284), USB high speed (ver 2.0), Serial
input buffer	128KB

Weight and Dimensions

width	14.25" (13.7" without knob)
depth	10.83"
height	6.06"
weight	9.04 lb