Epson LX-350 User Manual

Home > Product Information
Printer Specifications
Mechanical
Electronic
Electrical
Environmental
Paper
Recommended printable area
Paper alignment
Mechanical
Printing method: 9-pin impact dot matrix
Printing speed: High speed draft 347 cps at 10 cpi
357 cps at 12 cpi
390 cps at 15 cpi
High speed draft condensed 383 cps at 17cpi
298 cps at 20 cpi
Draft 260 cps at 10 cpi
312 cps at 12 cpi
223 cps at 15 cpi
Draft condensed 222 cps at 17 cpi
260 cps at 20 cpi
Draft emphasized 130 cps at 10 cpi
NLQ 65 cps at 10 cpi
78 cps at 12 cpi
55 cps at 15 cpi
47 cps at 17 cpi
56 cps at 20 cpi
Printing direction: Bidirectional logic seeking for text and graphics printing. Unidirectional
text or graphics printing can be selected using software commands.
Line spacing: 4.23 mm (1/6-inch) or programmable in 0.118 mm (1/216-inch)
increments
Printable columns: 80 columns (at 10 cpi)
Resolution: 240 × 144 dpi maximum
Feeding method: Friction feed (rear paper entry)
Push tractor feed (rear paper entry)
Feeder: Rear push tractor
Roll paper holder (Optional)
Paper feed speed: Continuous 63 mm/second
(2.5 inches/second)
Intermittent 63 msec/line at 1/6-inch line spacing
Reliability: Total print volume 20 million lines
(except print head)
MTBF 10,000 POH
(25% duty)
Print head life 400 million strokes per wire
Dimensions and weight: When using continuous paper:
Height 199 mm (7.8 inches)
Width 362 mm (14.3 inches)

Epson LX-350 Specifications

General

print speed (draft high-speed)	347 cps (10 cpi), 357 cps (12 cpi), 390 cps (15 cpi)
print speed (draft high-speed condensed)	383 cps (17 cpi), 298 cps (20 cpi)
print speed (draft)	260 cps (10 cpi), 312 cps (12 cpi), 223 cps (15 cpi)
print speed (draft condensed)	222 cps (17 cpi), 260 cps (20 cpi)
print speed (draft in bold)	130 cps (10 cpi)
print speed (near letter quality)	65 cps (10 cpi), 78 cps (12 cpi), 55 cps (15 cpi), 47 cps (17 cpi), 56 cps (20 cpi)
column width	80 cpl (10 cpi), 96 cpl (12 cpi), 120 cpl (15 cpi), 137 cpl (17 cpi), 160 cpl (20 cpi)
cut sheets width	3.9 ~ 10.1" (100 ~ 257 mm)
cut sheets length	3.9 ~ 14.3" (100 ~ 364 mm)
cut sheets thickness	0.0025 ~ 0.0055" (0.065 ~ 0.14 mm)
multiple forms width	3.9 ~ 10.1" (100 ~ 257 mm)
multiple forms length	3.9 ~ 14.3" (100 ~ 364 mm)
multiple forms thickness	0.0047 ~ 0.015" (Total) (0.12 ~ 0.39 mm)
envelopes (No.6) width	6.5" (165 mm)
envelopes (No.6) length	3.6" (92 mm)
envelopes (No.6) thickness	0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
envelopes (No.10) width	9.5" (241 mm)
envelopes (No.10) length	4.1" (105 mm)
envelopes (No.10) thickness	0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
continuous forms width	4.0 ~ 10.0" (101.6 ~ 254.0 mm)
continuous forms length (per sheet)	4.0 ~ 22.0" (101.6 ~ 558.8 mm)
continuous forms thickness	0.0025 ~ 0.015" (Total) (0.065 ~ 0.39 mm)
paper roll holder width	8.5" (216 mm)
paper roll holder thickness	0.0028 ~ 0.0035" (0.07 ~ 0.09 mm)
copies	1 original + 4 copies
format space between lines	1/6" (4.23 mm) or programmable in increments of 1/216" (0.118 mm)
voltage	AC 120 V / AC 220 - 240 V
frequency	50 Hz / 60 Hz
power consumption	27 W (ISO/IEC 10561 Letter pattern)
power consumption in sleep mode	Approx. 1.1 W
power consumption in powered off mode	0 W
power consumption in auto off mode	Approx. 0.3W
temperature	41 ~ 95°F
humidity	10 ~ 80% RH
mean time before failure	10, 000 POH (at 25% duty)
print head life	400 million strokes/wire
sound level	Approx. 53 dB(A) (ISO 7779 standard)
interfaces	Bidirectional parallel (IEEE-1284), USB high speed (ver 2.0), Serial
input buffer	128KB

Weight and Dimensions

width	14.25" (13.7" without knob)
depth	10.83"
height	6.06"
weight	9.04 lb