EasyManuals Logo
Home>Epson>Printer>LX-350

Epson LX-350 User Manual

Epson LX-350
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Home > Problem Solver
Problems and Solutions
Power supply
Printing
Paper handling
Network problems
Most problems you may encounter while operating your printer have simple solutions.
You can check the operation of your printer using the self test. See Printing a Self Test. If the self test works properly the
problem probably lies in the computer, the application software, or the interface cable. If the self test does not work, contact
your dealer or a qualified service person for assistance.
Note:
If you are an experienced user or a programmer, you can print a hexadecimal dump to isolate communication
problems between the printer and computer. To print a hex dump, turn off the printer. Next, hold down the
Load/Eject and LF/FF buttons while you turn on the printer. Then send data from your computer. The
printer prints all the codes it receives in hexadecimal format.
Power supply
Power is not being supplied
The lights on the control panel do not go on.
Cause What to do
The power cord may be unplugged. Check that the power cord is properly plugged into the
electrical outlet.
The outlet may not be operating. If the electrical outlet is controlled by an outside switch or
automatic timer, use a different outlet. Plug another electrical
device, such as a lamp, into the outlet to determine whether
the outlet is operating properly.
The power switch is not in the ON position. Check the status of the power switch. When Power off timer is
enabled, the printer turns off even if the power switch is in
the ON position. See Default Setting mode.
The lights come on briefly and then go off. The lights stay off even when the power is turned on again.
Cause What to do
The voltage ratings of the printer and electrical
outlet may not match.
Check that the printer’s voltage rating matches the voltage of
your electrical outlet. If the voltages do not match, unplug the
printer and contact your dealer immediately. Do not reconnect
the power cord to an electrical outlet.
Top
Printing

Table of Contents

Other manuals for Epson LX-350

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson LX-350 and is the answer not in the manual?

Epson LX-350 Specifications

General IconGeneral
print speed (draft high-speed)347 cps (10 cpi), 357 cps (12 cpi), 390 cps (15 cpi)
print speed (draft high-speed condensed)383 cps (17 cpi), 298 cps (20 cpi)
print speed (draft)260 cps (10 cpi), 312 cps (12 cpi), 223 cps (15 cpi)
print speed (draft condensed)222 cps (17 cpi), 260 cps (20 cpi)
print speed (draft in bold)130 cps (10 cpi)
print speed (near letter quality)65 cps (10 cpi), 78 cps (12 cpi), 55 cps (15 cpi), 47 cps (17 cpi), 56 cps (20 cpi)
column width80 cpl (10 cpi), 96 cpl (12 cpi), 120 cpl (15 cpi), 137 cpl (17 cpi), 160 cpl (20 cpi)
cut sheets width3.9 ~ 10.1" (100 ~ 257 mm)
cut sheets length3.9 ~ 14.3" (100 ~ 364 mm)
cut sheets thickness0.0025 ~ 0.0055" (0.065 ~ 0.14 mm)
multiple forms width3.9 ~ 10.1" (100 ~ 257 mm)
multiple forms length3.9 ~ 14.3" (100 ~ 364 mm)
multiple forms thickness0.0047 ~ 0.015" (Total) (0.12 ~ 0.39 mm)
envelopes (No.6) width6.5" (165 mm)
envelopes (No.6) length3.6" (92 mm)
envelopes (No.6) thickness0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
envelopes (No.10) width9.5" (241 mm)
envelopes (No.10) length4.1" (105 mm)
envelopes (No.10) thickness0.0063 ~ 0.0205" (Total) (0.16 ~ 0.52 mm)
continuous forms width4.0 ~ 10.0" (101.6 ~ 254.0 mm)
continuous forms length (per sheet)4.0 ~ 22.0" (101.6 ~ 558.8 mm)
continuous forms thickness0.0025 ~ 0.015" (Total) (0.065 ~ 0.39 mm)
paper roll holder width8.5" (216 mm)
paper roll holder thickness0.0028 ~ 0.0035" (0.07 ~ 0.09 mm)
copies1 original + 4 copies
format space between lines1/6" (4.23 mm) or programmable in increments of 1/216" (0.118 mm)
voltageAC 120 V / AC 220 - 240 V
frequency50 Hz / 60 Hz
power consumption27 W (ISO/IEC 10561 Letter pattern)
power consumption in sleep modeApprox. 1.1 W
power consumption in powered off mode0 W
power consumption in auto off modeApprox. 0.3W
temperature41 ~ 95°F
humidity10 ~ 80% RH
mean time before failure10, 000 POH (at 25% duty)
print head life400 million strokes/wire
sound levelApprox. 53 dB(A) (ISO 7779 standard)
interfacesBidirectional parallel (IEEE-1284), USB high speed (ver 2.0), Serial
input buffer128KB
Weight and Dimensions IconWeight and Dimensions
width14.25" (13.7" without knob)
depth10.83"
height6.06"
weight9.04 lb

Related product manuals