5. Select Head Cleaning and press the OK button.
6. Press the start button to clean the print head. You see a print head cleaning message on the LCD
screen during the cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
When the cleaning cycle is finished, you see a completion message on the display screen.
7. Select Nozzle Check and press the OK button.
8. Press the start button to run a nozzle check and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 2 times, turn the product off and wait
at least 6 hours. Then check the print head nozzles and try cleaning the print head again, if necessary. If
quality still does not improve, contact Epson.
Parent topic: Print Head Cleaning
Related tasks
Checking the Nozzles Using the Product Control Panel
Related topics
Loading Paper
Replacing the Ink Cartridge
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows or Mac computer.
111
To Next Page
Loading...
Need help?
General