When you move the printer while packaging it, place
your hands at the positions in the illustration, and then
lift.
c
Important:
❏ Only hold the required area; otherwise, the
printer may be damaged. Failure to observe this
precaution could damage the printer.
❏ Move and transport the printer with ink
cartridges installed. Do not remove the ink
cartridges; otherwise, the nozzles may be
clogged and make it impossible to print, or ink
may leak.
Notes when reusing the printer
After moving or transporting the printer, follow the
steps below to put it into a ready status.
See the Choosing a Place for the Printer section of the
"Setup Guide" (booklet) in advance to make sure the
location is suitable for installing the printer.
A
See the "Setup Guide" to install the printer.
U "Setup Guide" (booklet)
c
Important:
Make sure you lock the casters after installing
the printer.
B
Follow the on-screen instructions to fill the ink.
C
Check the print head nozzles.
U “Print Head Nozzle Check” on page 115
SC-P9500 Series/SC-P7500 Series User's Guide
Appendix
172
To Next Page
Loading...
Need help?
General