When printing borderless on the left and right, the left
and right margins are 0 mm.
*1 SC-P9500 Series
*2 SC-P7500 Series
*3 15.5 mm when printing Enhanced Matte Poster
Board
Turning Off the Power
Using Power Off Timer
The printer offers the following two power management
options.
Saving Power
The printer enters sleep mode or turns off automatically
if no operations are performed for a set period. You can
adjust the time before power management is applied.
Any increase will affect the product's energy efficiency.
Please consider the environment before making any
changes.
Sleep mode
The printer enters sleep mode when there are no errors,
no print jobs being received, and no control panel or
other operations performed. When the printer enters
sleep mode, the control panel's screen turns off and the
internal motors and other parts switch off to consume
less power.
Sleep mode is cleared if a print job is received or a button
on the control panel is pressed.
You can set the time before entering sleep mode from 1
to 60 minutes. By default, the printer enters sleep mode
if no operations are performed for 5 minutes. You can
change the Sleep Timer in "General Settings".
U “General Settings” on page 106
Note:
When the printer enters sleep mode, the control panel's
screen goes blank as if the power has been turned off, but
the power light remains on.
Power Off Timer
The printer is equipped with a Power Off Timer option
that automatically turns the printer off if no errors
occur, no print jobs are received, and no control panel or
other operations are performed for a set period of time.
You can set the time until the printer automatically
turns off from 30 minutes to 12 hours.
The factory default setting is Off. You can set Power Off
Timer from the "General Settings" menu.
SC-P9500 Series/SC-P7500 Series User's Guide
Basic Operations
49
To Next Page
Need help?
General