Cut Sheet(1 sheet) menu
The Paper Setting menu is displayed if paper is loaded.
*Default setting
Settings item Settings value Explanation
Remove Touch to eject the loaded cut sheet (1 sheet) without printing.
Touch to eject to the front.
U “Removing Cut Sheet (1 Sheet)” on page 36
Media Adjust Start Run this adjustment when there is a problem with print results,
or after registering custom paper settings.
Touch Start to print an adjustment pattern. Follow the on-screen
instructions to make adjustments.
The adjustment results are saved as settings for the selected
paper type.
U “Optimizing Paper Settings (Media Adjust)” on page 42
Change Paper Type/Paper Size
Paper Type
Plain paper
*
Select the type of loaded paper. The three options other than
Others display the most recently selected paper type. When the
desired paper type is not displayed, touch Others to display the
other paper types and then select a paper type.
U “For Auto Sheet Feeder/Cut Sheet(1 sheet)” on page 39
Coated
Paper(Generic)
Premium Glossy
Sheet
Others
Paper Size A Series Select the size of the loaded paper.
If the desired size is not in the options, then select User-Defined,
and enter the paper width and length.
US-ANSI
US-ARCH
B Series (ISO)
B Series (JIS)
Others
User-Defined
SC-T3100x Series User's Guide
Using the Menu
110
To Next Page
Loading...
Need help?
General