Supported Commercially Available Paper
This printer supports the following paper specifications for non-Epson media.
c
Important:
❏ Do not use paper that is wrinkled, scuffed, torn, or dirty.
❏ Commercially available paper corresponding to the paper types in the table can be loaded in and fed
through the printer as long as they meet the following specifications, however Epson cannot guarantee
the print quality.
❏ Commercially available paper types not in the table can be loaded in the printer as long as they meet the
following specifications, however Epson cannot guarantee the feed and print quality.
Roll Paper
Paper type Plain paper, coated paper, photo paper, tracing paper, matte film
Roll core size 2 inches
Roll paper outer diameter Up to 110 mm
Paper width 329 to 610 mm (24 inches)
Paper thickness 0.05 to 0.21 mm
Roll weight 3 kg or less
Cut sheets (Auto sheet feeder)
Media Type Plain paper, coated paper, photo paper
Paper Size A4 to A3
Paper thickness 0.12 to 0.27 mm
You can load up to 50 sheets of plain paper in the auto sheet feeder, or up to 5 sheets of other paper types.
However, depending on the thickness of the paper, feeding may fail even if you load less than the number of sheets
mentioned above. In this situation, try loading fewer sheets of paper.
Cut Sheet (1 sheet)
Paper type Plain paper, coated paper, photo paper, tracing paper, matte film
Paper width 210 to 610 mm (24 inches)
Length 279.4 mm (Letter) to 1,189 mm
Paper thickness 0.12 to 0.27 mm
SC-T3100x Series User's Guide
Appendix
156
To Next Page
Loading...
Need help?
General