Operation
09/2011 1002410-04 Operating instructions – 33
4.9 Connect MP3 player
DANGER!
Danger of hearing damage!
Using earphones or headphones at high volume can result
in permanent hearing damage.
– Do not set the volume too high.
The user can connect her/his own private MP3 player to the tanning device, if
the 'Audio system' accessory is fitted.
1. Mat.-No. 1001855-.. provided for use by the studio operator
(1.5 m / 2 x 3.5 mm stereo jack plug).
2. MP3 player connection: see the documentation from the manufacturer of
the MP3 player.
Connecting:
– Insert the MP3 cable (stereo jack plug) in the audio system.
– Plug the MP3 cable into the MP3 player.
– Select the music title and then start.
– Where necessary, set the volume level on the MP3 player so that the
sound signal from the MP3 player is recognised by the audio system.
WARNING!
The heat might damage your MP3 player!
– Do not place the player directly in the radiation area.
The cable might crack, the connectors might be damaged.
– Do not pull on the cable when unplugging the MP3 player.
To Next Page
Loading...
Need help?
General
