ergoline AFFINITY 660 DYNAMIC POWER User Manual

Cleaning and maintenance
52
– Remove the 3 UV low pressure lamps before removing the interior light-
ing.
– Removing the interior lighting.
Replacing the lamps: see page 45.
Replacing the starter: see page 46.
The assembly is the same process in reverse order.
5.15 Cleaning or replacing the canopy
accent lighting
2 effect lamps are located in the canopy.
WARNING!
May damage paintwork!
Keep away from lower edge when fitting.
– Remove the screws.
– Remove the cover.

ergoline AFFINITY 660 DYNAMIC POWER Specifications

General

Brand	ergoline
Model	AFFINITY 660 DYNAMIC POWER
Category	Tanning equipment
Language	English