4 Web Configuration Guide
4.4.4 HTTPS
The ONU provides the HTTPS function. The HTTPS is the HTTP
channel for security. It is built on the SSL+HTTP protocol, which can
perform encryption transmission and identity authentication.
1. Select Security in the navigation bar and select HTTPS in the
left link bar to open the HTTPS function configuration tab, as
shown in Figure 4.18.
Figure 4.18 HTTPS
2. Select to Enable or Disable the HTTPS function as required.
Caution:
After enabling the HTTPS function, log into the Web GUI. The
protocol type in URL should be https and the management IP
address should be added with the port number 4433, e.g. https://
192.168.1.1:4433.
3. Click Apply to save and apply the configuration.
4.5 Application
The following introduces how to configure the DDNS, port
forwarding, NAT, and network diagnosis in the Web GUI.
53
To Next Page
Loading...
Need help?
General
