FiberHome HG6543C User Manual

HG6543C Product Manual
Table 3-6 Parameters for Internet Settings (Continued)
Item
Description
Priority Sets the priority of the VLAN. The value range is 0 to 7.
NAT Enables or disables the NAT function.
u Users need to
configure this item
when the service type
is set to
TR069_INTERNET or
VOIP_INTERNET.
u Users need to
configure this item
when the service type
is set to INTERNET or
OTHER and the
connection type is set
to Route.
DNS Relay Enables or disables the DNS relay function.
MTU
Enter the maximum transmission unit. It is
advised to use the default value.
LAN Binding Select the LAN port to be bound with the WAN port.
2.4G SSID
Binding
Select the wireless 2.4G SSID to be bound with the WAN port.
IP Mode
The options include IPv4&IPv6, IPv4 and
IPv6.
u Users need to
configure this item
when the service type
is set to
TR069_INTERNET or
VOIP_INTERNET.
u Users need to
configure this item
when the service type
is set to INTERNET or
OTHER and the
connection type is set
to Route.
WAN IP Mode
Sets the IP address obtaining mode at the
WAN side of the ONT. The options include
DHCP, static and PPPoE.
u DHCP: Obtaining the IP address
dynamically.
u Static: Setting the IP address in a static
mode.
u PPPoE: PPPoE dialing mode.
This item should be set if
the connection type is
Route.
38
Version: A

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English