FiberHome HG6543C User Manual

3 Web Configuration Guide
Table 3-6 Parameters for Internet Settings (Continued)
Item
Description
User Name
Enter the username provided by the ISP.
This item should be set if
the WAN IP Mode is set to
PPPoE.
Password
Enter the password provided by the ISP.
Operation
Mode
Sets the PPPoE connection mode. The default
setting is Keep Alive.
IP Address
Enter the static IP address at the WAN side
provided by the ISP.
This item should be set
when the IP Mode is set to
IPv4&IPv6 or IPv4 and the
WAN IP Mode is set to
static.
Netmask
Enter the subnet mask provided by the ISP.
Default
Gateway
Enter the default gateway provided by the ISP.
Primary DNS
Server
Enter the IP address of the active DNS server
provided by the ISP.
Secondary
DNS Server
Enter the IP address of the standby DNS
server provided by the ISP.
IPv6 Address
Enter the static IPv6 address at the WAN side
provided by the ISP.
This item should be set
when the IP Mode is set to
IPv4&IPv6 or IPv6 and the
WAN IP Mode is set to
static.
IPv6 Prefix
Length
Enter the static IPv6 address prefix length at
the WAN side provided by the ISP.
Default
Gateway
Enter the default gateway provided by the ISP.
Primary DNS
Server
Enter the IP address of the active DNS server
provided by the ISP.
Secondary
DNS Server
Enter the IP address of the standby DNS
server provided by the ISP.
IPv6 Address
Mode / IPv6
Prefix Mode
Select the IPv6 address obtaining mode /
prefix obtaining mode.
This item should be set
when the IP Mode is set to
IPv4&IPv6 or IPv6 and the
WAN IP Mode is set to
DHCP or PPPoE.
3.3.43.3.4 DHCP Server
The DHCP function enables the ONT to distribute network parameters (such as the
IP address, gateway and DNS server IP address) to the devices (such as a computer)
in the LAN. Users can manage the IP addresses collectively using this function.
Version: A
39

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English