FiberHome HG6543C User Manual

HG6543C Product Manual
Table 3-20 Parameters for IPv6 MAC Address Filtering (Continued)
Item
Description
End Time
The ending time of the filtering rule.
Enable
Enables or disables this filtering rule. The options include Disable and
Enable.
3.4.23.4.2 Remote Control
Enable or disable the remote access control. When the remote control is disabled,
the PCs in the Internet cannot access the Web GUI of the ONT using the IP
addresses at the WAN side; when enabled, the PCs in the Internet can access the
Web GUI of the ONT using the aforesaid IP addresses.
1. Select Security in the navigation bar and select Remote Control→Remote
Control in the left link bar to open the remote control configuration page, as
shown in Figure 3-32.
Figure 3-32 Remote Control
2. Enable or Disable the remote access control as required.
3. Click Apply to save and apply the configuration.
3.4.33.4.3 Route QoS
The route QoS includes route QoS enabling and route QoS configuration.
3.4.3.13.4.3.1 Enabling Route QoS
Enable / disable the route QoS function.
62
Version: A

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English