FiberHome HG6543C User Manual

3 Web Configuration Guide
Figure 3-18 IPv6 Static Routing
2. Configure the parameters relevant to static routing as required. For details of
the parameters, see Table 3-9.
3. Click Apply to save and apply the configuration.
Table 3-9 Parameters for the IPv6 Static Routing
Item Description
DstPrefix
The destination IP address to be accessed by the host.
Nexthop The IP address of the next-hop gateway.
WAN Name
The WAN port passed by the static routing. Select a valid WAN port.
3.3.73.3.7 Voice Configuration
This section introduces how to configure the key parameters, basic parameters,
advanced settings, digitmap and time length, and coding mode for voice services in
the Web page.
3.3.7.13.3.7.1 Key Parameters
Configure the parameters such as VoIP protocol type and VoIP port.
1. Select Network in the navigation bar and select VoIP Settings→Key
Parameters from the link bar on the left side to open the VoIP key parameter
page, as shown in Figure 3-19.
Version: A
43

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English