EasyManuals Logo
Home>FiberHome>Network Router>HG6543C

FiberHome HG6543C User Manual

FiberHome HG6543C
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
3 Web Configuration Guide
Table 3-7 Parameters for the DHCP Server (Continued)
Item
Description
DHCP Subnet
Mask
The mask of the active DHCP server.
DHCP Primary
DNS
The IP address of the active DNS server.
DHCP Secondary
DNS
The IP address of the standby DNS server.
DHCP Default
Gateway
The default gateway of the active DHCP server.
DHCP Lease
Time
The lease time of the IP address pool of the DHCP server.
Option60 Sets whether to enable the Option 60 property to identify the user terminal.
Option 60 start IP
The starting IP address of the network
segment distributed to the Option 60
property terminal by the DHCP server.
This item should be
configured when the Option
60 field of the DHCP server
is enabled.
Option 60 end IP
The ending IP address of the network
segment distributed to the Option 60
property terminal by the DHCP server.
3.3.53.3.5 Authentication Settings
Configure the parameters relevant to the ONT authentication mode, so that the ONT
can pass the OLT authentication.
1. Select Network in the navigation bar and select AuthenticationOLT
Authentication in the left link bar to open the OLT authentication configuration
page, as shown in Figure 3-17.
Version: A
41

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FiberHome HG6543C and is the answer not in the manual?

FiberHome HG6543C Specifications

General IconGeneral
BrandFiberHome
ModelHG6543C
CategoryNetwork Router
LanguageEnglish

Related product manuals