Adjust the volume of your remote. 1 is the lowest. 3 is the highest.
Changes the temperature readout from Fahrenheit to Celsius.
Turns your Auxiliary Extender feature on or off.
Allows you to use the Lock and Unlock buttons for sliding doors via
Aux 1 and 2.
Sets your remote for Alarm or Starter Only systems. Set to FULL for
ALARM IT and MAX IT features. Set to HALF for START IT ONLY
systems.
Adjusts the time your LCD will stay on after a button is pressed.
English /
Francais /
Espanol
Changes LCD display language from English to French or Spanish.
1 Way Remote Button Functions
Additional
Programming
Required
Locks doors and/or arms alarm.
Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn).
Unlocks doors and/or disarms alarm.
Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window
roll-down).
Trunk release. Triggers the trunk release output and opens the vehicle’s trunk.
Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window
roll-down).
Activates the remote start. Repeat and remote start will shut off.
Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the
alarm is triggered).
Option programming menu 1 - Installers Only.
Valet Mode (see Valet Mode Section for details)
Turns the shock sensor on/off. (Alarm or Alarm/Starter systems only)