11 | Individualization and data transfer Franke Kaffeemaschinen AG
78 User manual SB1200 FM CM
Desired action Menu item Information/instruction
Use media 2.7 My advertising media – In the lower area, tap on the medium to be used
– Drag the medium to the top
Delete used media 2.7 My advertising media – In the upper area, tap on the medium that is no
longer to be used
– Drag the medium to the bottom
View a selection 2.7 My advertising media – Select Preview to check the selection
Activate advertising media 2.7 My advertising media – Select Change to activate the advertising media
11.7.3 Assigning your own product images
An image must be assigned to each available product.
The images can be activated by selecting the menu item My settings > Set machine > Operating mode.
Products to which no image has been assigned will be displayed without an image.
You can either use the Franke images or your own, but you cannot mix the two types with one another.
Desired action Menu item Information/instruction
Select an image 2.12 My product images – Tap the image
– Press Select image
Delete an image 2.12 My product images – Tap the image
– Press Delete image
11.8 Configure application
Parameter Value range Remarks
Version Example: 3.30 Display of the current version
Standard language Display of the set standard language. The machine will
revert to this language after a set wait time.
11.8.1 Language settings
Parameter Value range Remarks
Switching language – Yes
– No
Activate/deactivate language switching
Timeout for switching language 20–120s Wait time, after which the coffee machine reverts back to
the standard language set under Menu 1 Set machine >
1.1 Language
Language 1–6 – Language 1: Pop-
up list with the
available lan-
guages/flags
– ...
– Language 6: Pop-
up list with the
available lan-
guages/flags
The customer sees the flags corresponding to the up to 6
configured languages. The customer can use these flags
to switch from the standard language to the language
they require
To Next Page
Loading...
Need help?
General
