Fronius TransSteel 2500c User Manual

41
EN
Minimum equipment needed for welding task
General Depending on which welding process you intend to use, a certain minimum equipment lev-
el will be needed in order to work with the power source.
The welding processes and the minimum equipment levels required for the welding task
are then described.
MIG/MAG weld-
ing, gas-cooled
- Power source
- Grounding (earthing) cable
- MIG/MAG welding torch, gas-cooled
- Gas connection (shielding gas supply)
- Wire electrode
MIG/MAG weld-
ing, water-cooled
- Power source
- Cooling unit including coolant
- Grounding (earthing) cable
- MIG/MAG welding torch, water-cooled
- Gas connection (shielding gas supply)
- Wire electrode
Manual metal arc
welding
- Power source
- Grounding (earthing) cable
- Electrode holder
- Rod electrode

Fronius TransSteel 2500c Specifications

General

Brand	Fronius
Model	TransSteel 2500c
Category	Portable Generator
Language	English