-17-
ii Basic Operations of the Machine
Offset
Offset on the Extra Center Tray is optional. Offset cannot be performed on the Side Tray.
The paper is output with offset stacking for easy separation.
Use the printer driver to set the offset of outputs.
Center Tray Attention Light
Center Tray Attention Light starts blinking after a print job is started
and lights up after the printing is finished. So, you can check the
printing progress even when you are away from the machine.
Also, the Center Tray Attention Light remains lit when ejected paper
is still remaining on the Center Tray.
Center Tray Attention Light may not blink or light up
depending on the output tray used and method of finishing
the job.
In the Power Saver Mode, the Center Tray Attention Light
does not turn on.
Inhibiting the light from lighting
1.
On the Home screen, login to the Administrator Mode.
2.
Select [Device] > [System Settings] > [Other Settings] >
[Center Tray Attention Light], and then tap on
[Disabled].
Changing the Light Lighting Duration
1.
On the Home screen, login to the Administrator Mode.
2.
Select [Device] > [System Settings] > [Power Saver Settings] >
[Power Saver Timers], enter the time for [Low Power Mode]
and [Sleep Mode], and then tap on [OK].
Paper size Width 128 to 297 mm
Length 210 to 432 mm
Paper weight 52 to 256 g/m
2
To Next Page
Loading...
Need help?
General
