-16-
Reference Guide - Main Unit
Outputting Paper
Print Surface
The print surface refers to the surface printed on in single-sided printing (the first page in double-sided print-
ing).
Trays other than Side Tray: Face-down
Side Tray: Face-up
Paper cannot be output upside down.
Long paper
Long paper cannot be used for double-sided printing.
The paper cannot be output to the Center Tray depending on the type of finisher installed.
Tray Capacity
A4 paper
The tray capacity varies depending on the following conditions.
- Paper size, paper weight
- Paper types (coated paper or uncoated paper, paper curl height, etc.)
- Single-sided prints / double-sided prints
-Image density
The output operation automatically stops when the Center Tray becomes full.
Single-sided printing Double-sided printing
Paper size Width 88.9 to 320 mm 128 to 320 mm
Length 98.4 to 482.6 mm 139.7 to 482.6 mm
Paper weight 52 to 300 g/m
2
Paper size Length Up to 1,200 mm
Center Tray With Extra Center Tray Without offset 400 sheets
With offset 200 sheets
Without Extra Center Tray Without offset 250 sheets
With offset 125 sheets
Extra Center Tray Without offset Models equipped with Finisher A 200 sheets
Models not equipped with Finisher A 250 sheets
With offset 125 sheets
Side Tray 100 sheets
To Next Page
Loading...
Need help?
General
