-3-
i Before Using the Machine
Left Side and Rear View
LAN connection
When connecting to the network port, keep the machine power switched off.
Connection failure may be solved by selecting the Administrator Mode’s Home screen > [Device] >
[Connectivity & Network Setup] > [Protocol Settings] > [Ethernet Settings] > [Energy Efficient Ethernet] >
[Disabled].
USB connection
When connecting to a USB connector, keep the machine power switched off.
No. Component Function
1
Telephone line connectors Use “TEL” to call.
Use “LINE 1” for calls using a handset connected to the TEL jack.
2 Upper Left Cover Open this cover to clear paper jams.
3Lower Left Cover
4 Right Rear Cover Open this cover to access each connector.
5 Reset button Automatically switches the machine off when a current leakage is detected.
6
7 Network Port (optional) Connects to a network cable.
8
USB 2.0 interface connector Connects to a memory card reader, an optional component or a peripheral
with a USB cable.
9 USB 3.0 interface connector Connects to a USB cable for printing.
10 Network Port Connects to a network cable.
11 Wireless Network Kit (optional) Used for connecting wireless network (Wi-Fi/Bluetooth) to the machine.
6
4
3
2
9
10
8
5
11
7
1
To Next Page
Loading...
Need help?
General
