Layout Adjustment
145
Copy
3
Original Orientation (Specifying the Orientation of Loaded Documents)
This feature allows you to specify the orientation of a document so that the machine can
identify the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
1 Select [Original Orientation].
2 Select [Upright Images] or [Sideways Images]
according to the orientation of the document
loaded.
Upright Images
Select this option when placing the top edge of
the document against the top side of the
document glass or document feeder.
Sideway Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
Image Rotation (Changing the Orientation of Images)
If the orientation of the paper currently loaded in the tray differs from that of the document
loaded, the machine automatically rotates the document image so that the orientation of
the image matches that of the paper. You can also select a reference position for image
rotation if documents are of mixed orientations.
This feature is available only when you make copies on A4, 8.5 x 11", or smaller size paper.
1 Select [Image Rotation].
2 Select any option.
Off
Copies documents as they are, even if the
orientation of the images does not match that
of the paper.
Always On
Automatically rotates document images so that
the orientation of the images matches that of the paper.
To Next Page
Loading...
Need help?
General
