To Next Page

To Previous Page

7 Job Flow Sheets (ApeosPort Series Models Only)

388

Job Flow Sheets (ApeosPort Series Models Only)

Job Flow Procedure

Job flow sheets are categorized into two types according to the target. One type of job flow

sheets targets scanned documents, and the other type targets files stored in folders. This

section describes the first type of job flow sheets, targeting scanned documents.

For information on job flow sheets that target files stored in folders, refer to "Configuring/Starting Job Flow" (P.381).

The following describes the procedure to operate a job flow. Refer to the following section

for each procedure.

Step 1 Opening the [Job Flow Sheets] Screen ...................................................................................................................... 388

Step 2 Selecting a Job Flow Sheet ........................................................................................................................................... 388

Step 3 Confirming/Changing the Job Flow Sheet................................................................................................................ 389

Step 4 Starting the Job Flow Sheet ......................................................................................................................................... 389

To create and register a job flow sheet, use a computer.

Note • To create a job flow sheet, use Device Setup Tool. You can download Device Setup Tool from our

official web site.

Step 1 Opening the [Job Flow Sheets] Screen

The following describes how to open the [Job Flow Sheets] screen.

1 Press the <Services Home> button.

2 Select [Job Flow Sheets].

Step 2 Selecting a Job Flow Sheet

Select a job flow sheet.

For more information on the [Job Flow Sheets] screen, refer to

"Selecting/Changing a Job Flow Sheet" (P.390).

<Services Home> button