Configuration for IC Card Reader (Optional)
449
Authentication and Accounting Features
14
Configuration for IC Card Reader (Optional)
You can use a smart card for authentication by comparing the information registered on the
smart card and the user information on the machine. You can also restrict the machine use
and perform accounting of the jobs using the information registered on the smart card.
This section describes the supported smart cards and how to register a smart card to use at
the machine.
Note • An optional component is required to use this feature. For more information, contact our Customer
Support Center.
The following shows the reference section for card information and each procedure.
Step 1 Preparations .....................................................................................................................................................................449
Step 2 Logout Method Using the Smart Card.......................................................................................................................450
Step 3 Registering Smart Card Information..........................................................................................................................450
Step 1 Preparations
The machine supports IC Card Reader available for the following smart card type:
When using Embedded IC Card Reader
MIFARE
®
(Type A)
- Fuji Xerox IC Card (Type A)
- Other MIFARE compatible smart cards
*
eLWISE/ELWISE (Type B)
-eLWISE
-ELWISE
FeliCa
®
- Fuji Xerox IC Card
- IC Card compatible with SSFC
®
version 1.0 format
- Other FeliCa compatible smart cards
*
* : The embedded IC Card Reader of the machine may not support some smart cards.
When using Embedded IC Card Reader A
HID
®
PROX
MIFARE
- Fuji Xerox IC card Type A
-Other card types*
FeliCa
- Fuji Xerox IC card (IDm only)
- Other card types (IDm only)*
HID iCLASS
®
(UID only)
EM Prox
HITAG (HITAG2)
LEGIC
®
Advant (UID only)
* : The embedded IC Card Reader of the machine may not support some smart cards.