Facsimile Information Services
253
Fax
4
When Not Using a Receiver
1
Adjust the volume of the line monitor.
We recommend that you set the volume of the line monitor to [Loud] so that you can
hear the voice prompts clearly.
For information on how to change the volume of the line monitor, refer to "5 Tools" > "Common
Service Settings" > "Audio Tones" > "Line Monitor Volume" in the Administrator Guide.
2 Select [On-hook (Manual Send/Receive)] on
the [More Options] screen.
3 Select [Manual Receive] from the drop-down menu.
4 Specify the fax number of the facsimile information service.
z
You can use the numeric keypad, address numbers, or one touch buttons to specify
the call destination, but cannot use the Address Book.
z
You can use the keyboard displayed on the screen to specify the call destination.
Selecting [More Characters] on the screen displays symbols.
Note • When the line type is set to a tone line, [:] (Tone) does not appear. If you want to send tones
(or to use the touch-tone services) while using a pulse line, select [:] (Tone).
• Some touch-tone services may not be available even if you set your telephone to send
tones.
5 When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6 After entering the numbers, press the <Start> button.
To Next Page
Loading...
Need help?
General
