3 Copy
140
Copy
3
[Stored Secure Watermarks] Screen
This screen allows you to embed hidden text into documents.
With this hidden text feature, the specified text is embedded in the entire sheet.
When you copy a document that has been copied with this hidden text feature, the
embedded text on the output appears in white regardless of whether or not the Secure
Watermark Kit (optional) is installed.
1 Select any option.
îš„Off
Does not print hidden text.
îš„On
Prints hidden text.
Allows you to specify text from three preset texts, or text registered in the System
Settings.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Secure
Watermark" > "Secure Watermark Effect" > "Custom Secure Watermark 1 to 3" in the Administrator
Guide.
îš„Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder. Always select [Sideways Images] when the
top of the document is placed facing the left side (horizontal text).
To Next Page
Loading...
Need help?
General
