Fuji Xerox docucentre-iv C4470 User Manual

Energy Saver Mode
55
Product Overview
2
Entering the Energy Saver Mode
The following describes how to enter the Energy Saver mode.
Note • To enter the Energy Saver mode by pressing the <Energy Saver> button, specify a longer
time period in [From Last Operation to Sleep Mode] than in [From Last Operation to Low
Power Mode] under [Energy Saver Timers]. For information on [Energy Saver Timers], refer
to "5 Tools" > "Common Service Settings" > "Machine Clock/Timers" > "Energy Saver
Timers" in the Administrator Guide.
1 Press the <Energy Saver> button.
Note • The machine will not enter the Energy
Saver mode while a job is being
processed. Press the <Energy Saver>
button after the job is completed.
• The machine will not enter the Energy
Saver mode when [Skip Blank Pages] is
enabled. For information on [Skip Blank
Pages], refer to "5 Tools" > “Fax Service
Settings” > “Fax Control" > "Skip Blank
Pages" in the Administrator Guide.
Exiting the Energy Saver Mode
The following describes how to exit the Energy Saver mode.
The Energy Saver mode is exited in the following instances:
z
Pressing the <Energy Saver> button
z
Receiving a job
z
Selecting [Apply] in CentreWare Internet Services
1 Press the <Energy Saver> button.
<Energy Saver> button
<Energy Saver> button

Fuji Xerox docucentre-iv C4470 Specifications

General

Brand	Fuji Xerox
Model	docucentre-iv C4470
Category	All in One Printer
Language	English