Output Format
141
Copy
3
Tab Margin Shift (Copying on Tab Stock Paper)
This feature allows you to adjust the position of your document image to copy the image
onto tab stock paper.
Available sizes of tab stock paper are A4 and 8.5 x 11" .
Available paper tray is Tray 1, Tray 2, Tray 5 (Bypass), and Tray 6 (HCF B1-S). Load
tab stock paper face up, with the edge opposite to the tab to be fed first.
1 Select [Tab Margin Shift].
2 Select any option.
îš„Off
Disables this feature.
îš„Shift to Tab
Copies the image located on the edge of the document onto the tab area of tab stock
paper.
Enter a value in [Shift Value] to adjust the position of the tab image so that it is correctly
copied onto the tab area. Only the shifted image is copied, which means that the rest
of the image on the document is not copied.
îš„Shift All
Copies the whole image of the document onto tab stock paper.
Specify a value in [Shift Value] to shift the position of the image located on the edge of
the document so that the image can be copied onto the tab area.
îš„Shift Value
Allows you to specify how much the image needs to be shifted in the range from 0 to
15 mm in 1 mm increments.
îš„Add Tab Stock
Allows you to specify the number of sheets of tab stock paper.
îš„Paper Supply
Allows you to select a tray to be used for tab stock paper.
To Next Page
Loading...
Need help?
General
