Power Source
51
Product Overview
2
Use also the Energy Saver feature to save power consumption while the machine is not
in use.
For information on the Energy Saver feature, refer to "Energy Saver Mode" (P.54).
Important • If the power is switched off, all the services of the machine will stop. When using the
machine throughout the day for jobs such as receiving fax, do not switch the power off.
1 Press the power switch to the [ | ] position to
switch the power on.
Note • The “Please wait...” message indicates that the
machine is warming up. The machine is not
available during warming up.
• If the machine is not powered on, check the
following:
•The power cord is plugged in.
•The main power is switched on.
•The <RESET> button is in the depressed
position.
Switching the Power Off
The following describes how to switch the power off.
1 Before switching the power off, make sure that the machine has completed all copy or
print jobs. Then, make sure that the <Data> indicator does not light up.
Important • Do not switch the power off in the following situations. If the power is switched off, the
processing data may be erased.
• While data is being received
• While a job is being printed
• While a job is being copied
• While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
2 Press the power switch to the [ ] position.
Important • Power off processing is performed internally on
the machine for a while after the power is
switched off. Therefore, do not switch the main
power off immediately after switching the
power off.
Note • When powering the machine on after it has
been switched off, wait 15 seconds after the
touch screen has gone dark.
Ground fault interrupter
Test button
To Next Page
Loading...
Need help?
General
