Fax
4
4 Fax
196
2 Sided Scanning (Transmitting 2-sided Originals)
You can scan a 1-sided or 2-sided document on one or both sides of paper for fax
transmission.
Note • The image on the back side of a 2-sided document is rotated so that it is placed in the same
orientation as the image on the front side.
1 Select [2 Sided Scanning].
îš„1 Sided
Select this option to scan one side of the document.
îš„2 Sided
Select this option to scan both sides of the document.
îš„2 Sided (Skip Blank Pages)
Select this option to scan only the document pages that are not blank. You do not need
to take into account which side is the front when sending documents.
Important • If you select [2 Sided (Skip Blank Pages)] in [2 Sided Scanning] when the Skip Blank Pages
feature is enabled, image loss may occur on the fax document depending on the recipient's
machine. For example, when you select [2 Sided (Skip Blank Pages)] to send an A4 fax
document, image loss may occur in the area where the edge erase amounts is set when the
fax is printed on an A4 document by the recipient's machine.
• When you select [2 Sided (Skip Blank Pages)] on the [Simple Fax] screen, the machine is
set to select [100%] in [Reduce/Enlarge] automatically. When you select an option other
than [2 Sided (Skip Blank Pages)], the machine is set to select [Auto %] in [Reduce/Enlarge]
automatically.
Note • When [2 Sided (Skip Blank Pages)] is selected, the setting of [Original Type] changes to
[Text].
• You can switch whether to enable [2 Sided (Skip Blank Pages)] by pressing the <Energy
Saver> button while setting the fax features.
• The level of accuracy in which the machine determines whether a page is blank or not differs
depending on a document. For example, if a blank page has background shadows, the
machine may not determine the page as a blank page.
[2 Sided (Skip Blank Pages)] is displayed only when [Skip Blank Pages] is enabled. For more
information, refer to "5 Tools" > "Fax Service Settings" > "Fax Control" > "Skip Blank Pages" in the
Administrator Guide.
To Next Page
Loading...
Need help?
General
