5 Tools
246
Tools
5
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• The displayed items may vary depending on the options installed.
îš„ Fax Received - Line 1 to 3
Specify output tray for each line.
îš„ Fax Received - SIP
Specify output tray for IP fax (SIP).
îš„ Public Folder Printed Files
Specifies output tray for public folder for polling.
Reduce/Enlarge Presets
You can set the magnifications displayed as [Preset %] which are displayed under [Reduce/
Enlarge] in the [Layout Adjustment] screen. You can assign any magnification to the
Reduce/Enlarge Preset buttons other than [100%] and [Auto %].
îš„ Preset %
You can select from preset ratios.
îš„ Variable %
You can specify a magnification from 50 to 400% in 1% increments.
Original Size Defaults
You can set the original sizes displayed in [Original Size] in the [Layout Adjustment] screen.
You can assign original sizes to the buttons other than [Auto Detect].
If you frequently use non-standard size paper for scanning, setting non-standard size as the
default will save your time to specify the size each time.
îš„ A/B Series Size
You can select from sizes of A and B series such as A4 and B5.
îš„ Inch Size
You can select from size of Inch series such as 8.5 x 11" and 11 x 17".
îš„ Others
You can select from sizes of other than the above series such as photo and postcard sizes.
Local Terminal Information
You can set the local terminal information, including a local name and company logo.
Note • The displayed items may vary depending on the options installed.
• There are a maximum of three lines that can be used for G3 communications: line 1, line 2, and line
3.
• For each line, you can set a company logo, G3 ID (fax number), G3 dial type, and G3 line type.
For information about how to enter characters, refer to "Entering Text" (P.36).
To Next Page
Loading...
Need help?
General
