246
Peripherals and Optional Accessories
10
Attaching the Vertical Battery Grip
(A)
(B)
(A)
N
•
Check that the camera is o before attaching or removing the vertical
battery grip.
•
The camera vertical battery grip contact cover (A) can be stored in
the grip. Keep the grip contact cap (B) in a safe place when not in use.
O
•
Fully tighten the lock screw knob after attaching the grip.
•
Do not touch the contacts.
•
After removing the grip, replace the grip contact cover (A) and con-
tact cap (B).
•
The grip is not waterproof, and caution is required to prevent the en-
try of dirt, dust, water, noxious gases, salt, and other foreign matter.
Do not place the grip on wet surfaces. Before use, be sure that the
battery tray and battery-chamber cover are fully closed.
To Next Page
Loading...
