12-2. Remote controller address setting procedure for wireless
remote controllers
1. Enter the function setting mode of the wireless remote controller. For details, refer to "Function
settings" on page 128.
2. Select the function number “00” (Remote controller address setting), and then select any of the
number (Setting value) from 00 to 15. (Factory setting: 00)
- 110 -
12-2. Remote controller address setting procedure for wireless remote controllers 12. Group connection
MULTI TYPE
2, 3, 4 ROOMS TYPE
MULTI TYPE
2, 3, 4 ROOMS TYPE
To Next Page
Loading...
Need help?
General
