7 Instructions for the user
Explain to the user how his installation operates, in
particular the functions of the room thermostat and
the programmes accessible to him from the user
interface.
Emphasise that a heated floor has significant inertia
and that therefore any adjustments must be made
progressively
Also explain to the user how to check the filling of the
heating circuit
60 Installation and operating manual “1350-EN”
Heat pump, Split, single service
Complies with :
- Low tension Directive 73/23/CEE, under standard NF-EN60335-1.
- Electromagnetic compatibility Diretive 89/336/CEE
- Directive 98/37/EC,
- Directive for pressurised equipment 97/23/EC,
- Directive for labelling energy consumption 2002/31/EC
This appliance also conforms to:
- Decree No. 92-1271 (and its modifications) relating to certain refrigeration fluids used in refrigerating and
air conditioning equipment.
- The standards relating to the product and the testing methods used:
Air-conditioners, refrigeration units and heat pumps with compressor driven by electric motor for heating and
refrigeration EN 14511-1, 14511-2, 14511-3, and 14511-4
- To standard XP ENV 12102: Air-conditioners, heat pumps and dehumidifiers with compressor driven by electric
motor. Measurement of airborne noise. Determination of acoustic power level.
To Previous Page
Loading...
Need help?
General