Fujitsu F-02F User Manual

Appendix/Index
169
･ When updating software, your private information
concerning F-02F (model, serial number, etc.) is
automatically sent to the server for software update
managed by DOCOMO. DOCOMO does not use the sent
information for purposes except software update.
･ When software update has failed, the terminal may not
activate or [Update failed] appears and all operations may
become unavailable. In that case, please bring the terminal
to DOCOMO-specified repair office.
･ When PIN code is set, the PIN code entry screen appears
during resetting after rewriting and you need to enter PIN
code.
･ While updating software, do not activate other applications.
◆ Updating software automatically
Update file is automatically downloaded and software is
updated at the specified time.
❖ Automatic update setting
･ The settings of Software Update is set to [Automatic Update]
by default.
1
From the Home screen, → [Settings] → [About
tablet]
→ [Software Update] → [Configure the
software update]
2
[Automatic Update]/[Manual Update]
❖ When software update is necessary
If the update file is downloaded automatically, (software
update available) appears on the status bar.
･ When the rewrite start time reaches with (software
update available) displayed, software is automatically
rewritten and (software update available) disappears.
1
Open the Notification panel and tap the
notification
Software update notice screen appears.
2
Perform target operations
Closing confirmation : [OK]
Return to the Home screen. Updating starts when the
preset time is reached.
Changing preset time : [Set Time]
For reserved update → P171 "Reserving software update"
Rewriting immediately : [Start update]
For updating immediately → P170 "Updating software
immediately"
✔ INFORMATION
･ If the software is not updated when the update notification is
received, (software update available) appears on the
status bar.
･ If software update at the preset time could not be performed,
the software update will be performed at the same time the
following day.
･ Software cannot be updated automatically when the Auto-
update setting is set to [Manual Update] or while updating
software by Now update.
Rewrite notice screen

Fujitsu F-02F Specifications

General

Brand	Fujitsu
Model	F-02F
Category	Tablet
Language	English