78
- Secure Digital (SD)/Secure Digital High Capacity (SDHC) Cards
Inserting SD/SDHC Cards
SD and SDHC cards are inserted in the SD Card slot (Figure 29). To insert a card, follow these steps:
1 See your card manual for instructions on the insertion of your card. Some cards may require that your system
is off while inserting them.
2 Make sure there is no card currently in the slot. If there is, see Removing an SD/SDHC Card.
3 Insert your card into the slot with the product label facing up.
4 Push the card firmly into the slot until it is seated in the connector.
Removing an SD/SDHC Card
To remove a card, first see your SD/SDHC card manual for instructions. Some cards may require your
LifeBook notebook to be in Suspend Mode or Off while removing them. Prior to removing the card from
the slot, first select it using the Safely Remove Hardware icon in the notification area. To remove the
card, push it in to release it, then pull it out.
• INSERTING OR REMOVING AN SD/SDHC CARD DURING YOUR LIFEBOOK NOTEBOOK’S SHUTDOWN OR
BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK NOTEBOOK.
• DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD
AS YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR LIFEBOOK NOTEBOOK, OR BOTH.
To Next Page
Loading...
Need help?
General