63
- Optical Drive
Figure 22. Loading/Ejecting Media
Removing Media
1 Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will
come out of the LIFEBOOK notebook a short distance.
2 Gently pull the tray out until the disc can easily be removed from the tray.
3 Carefully remove the media disc from the holder tray, then push the holder tray back in until you hear a click.
Emergency Optical Drive Tray Release
Using the Media Player Software
Starting a DVD Movie (DVD Models only)
1 Insert the DVD into the optical drive of the notebook. If the CD AutoRun feature activates, skip Step 2.
2 The first time you insert a movie into the optical drive tray, you will be prompted to select what you want the
system to do when discs are inserted (e.g., start automatically or wait for a prompt). Until you make a selection,
you will receive the same prompt whenever you insert a disc.
If for some reason the eject button fails, you can
open the media tray with a paper clip or similar tool
inserted into the eject hole in the right side of the
front of the tray. Straighten one side of a paper clip
and push it gently into the hole. The tray will pop
out.
Figure 23. Emergency Tray Release
D
EPENDING UPON ITS CONFIGURATION, YOUR SYSTEM MAY NOT HAVE THE MEDIA PLAYER SOFTWARE PRE-INSTALLED. IF IT IS NOT INSTALLED,
REFERENCE THE DOCUMENTATION THAT ACCOMPANIES THE MEDIA APPLICATION.
To Next Page
Loading...
Need help?
General