Operation
Changing the monitor settings
When putting the m onitor into operation for the first time, the screen d isplay should
be optimally adapt ed to the display adapter used.
Changing the monitor setti
ngs with the buttons
of the control panel
The button s of the control panel have two functions. If the OSD menu is
activated, a descrip tion of the current function of th e buttons is displayed
directly above the buttons at the edge of the screen. If the OSD menu is not
activated, you can make the following settings directly:
123
1 = Buttons for the OSD menu (On
Screen Display)
2 = ON/OFF switch
3 = Power s upply indicator
Select OSD language
If one of
the buttons is being pressed for the first time for the OSD menu, the
selecti
on screen for the langua ge is displayed:
► Press the
ECO
/ or the
INPUT
/ button to select the required langu age.
► Press the
MENU
/ button to confirm your entries or the
AUTO
/
button to cancel the process.
After s electing the OSD language for the first time, you can change
it at any time in the O SD.
Performing auto-adjustment of the monitor
► P
ress the
AUTO
/ button for about 1 second.
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Fujitsu Technology Solutions 19
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General