Operation
Setting functions
Call up the Setup settings window
Input select
Select the input signal
This function is used to select the input signal (VGA, D VI o r DP).
This is on condition that the display adapter supports this function.
Language
Set the language for the OSD menu
With this funct ion you select the language for the OSD menu.
The default setting is English.
DDC-CI
Activates/deactivates the DDC-CI function
On = The D DC-CI function is activated (defa ult setting)
Off = The DDC-CI function is deactivated
OSDTimeout
Set the display duration of th e O SD m enu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically faded out.
Factory recall
Activate the factory settings
With this function all settings are reset to the facto ry settings without
prompting for confirmation.
The function is executed with the
button. If you are using a VGA data
cable, an Auto Processing message is displayed. The language selection
menu appears.
Displaying information
Call the In formation setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal, colour setting and polarity of the synchronisation
signal are displayed.
26 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General