Operation
Selecting input signal (D-SUB/DVI-D/HDMI)
► Press the
INPUT
/ buttontocalluptheInput select settings window.
► Press the
ECO
/ or the
INPUT
/ button to select the desired
monitor connection (VGA, DVI or DP).
► Press the
MENU
/ buttontoconfirm your selection or the
AUTO
/ button to cancel the process.
This setting window can also be calle d up when the OSD menu is locked.
Locking the OSD menu
The O SD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
MENU
/ button for a few seconds while you switch
on the monitor using the ON/OFF switch.
The m essage OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD men u again.
Activate/deactivate ECO operating mode
The power consumption of the device can be decrease d by reducing
the brightness of the picture.
► Press the
ECO
/ button to switch the ECO operating mode on or off.
The message ECO Mode ein or ECO Mode off appears.
If the ECO
operating mode is activated, the following OSD s ettings are changed:
Mode
Office
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
20 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General