Operation
Operation
Switching the device on and off
1 23
12
1=SwitchOn/Off
2 = Po wer suppl
y indicator
3 = 0 W switch
The colour of the LED indicator changes as follows:
LED indicator Status
blue
Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode ).
orange
Monitor is not receiving a video signal or is in B ASIC power saving
mode.
does not light up
Monitor is switched off (or is in 0W power-saving mode).
The "0" position of the 0 W switch (3) on the rear activates ECO power saving mode (0 W
operating m ode), the "I" position switches to the BASI C power saving mode <1 W. This
setting is neede d for the HD M I and DP data cables, but may also become nece ssary for
VGA or DVI on some PCs if the monitor remains dark in the 0 W operating m ode.
► Switch the device on again with the ON /OF F switch (1).
Fujitsu Technology Solutions 17
To Next Page
Loading...
Need help?
General