Operation
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of the d isplay
With this function you c hang e the brightness of the backgroun d lighting.
Contrast
Set the contrast of the d isplay
With this function you mod ify the contrast of bright colour tones.
Black level
Set the brightness of the d isplay
With this function you modify the contra st of dark colour tones.
Auto Brightness
Automatic brightness control
This f unct ion is used to automatically control the brightness of the
background lighting using the light sensor.
On = The brightness is a djusted according to the ambient brightness
Off = The brightness is adjusted m anually by the user
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The f unction is execut ed with the
button.
If t he con trast is set too high, bright surfaces can no l onger be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Selecting the application mode
Call up the Mo
de setting window
D mode
Setting for
DICOM simulation (the v alues for c olour and AC R are locked:
Colour = 75
00K, ACR = o ff)
Office
Office presets (the settings for colour and sharpness can be adjusted)
Photo
Photo presets (colour, sharpness, saturati on, ACR)
Video
Video pr
esets (colour, sharpness, satura tio n, ACR )
ACR = Dynamic contrast (on / off)
24 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General