Operation
Setting colour temperature and colours
Call the Colour setting window
Select the colour temperature
The "w armth" of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, AdobeRGB, Native and Custom Colour.
The op tions sRGB, AdobeRGB, Native and Custom colour are only available in
Office mode setting.
In the user-defined setting you ca n change the colour r atios of the basic
colours (red, green, blue) as required.
The 6500K and sRGB settings are recommended for general W indows
applications.
The AdobeRGB setting is for applications in the enhanced AdobeRGB colour
space.
The full colour space of th e LCD panel can be used in the Native and Custom
Colour settings.
Setting functions
Call up the Setup settings window
Input select
Select the i nput signal
This function is used to se lect the input signal (VGA, D VI, DP, HDMI1 or
HDMI2).
This is on co ndition that the display adapter supports this function.
Language
Set the language for the OSD m enu
With this function you select the language for the OSD menu.
The default setting is English.
DDC-CI
Activates/deactivates the DDC-CI function
On = The DDC-CI function is activated (default setting)
Off = The DDC-CI function is deactivated
OSDTimeout
Set the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the s et time expires without a setting being made , the OSD m enu is
automatically faded out.
Factory recall
Activate the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
The function is executed with the
button. If you are using a VGA data
cable, an Auto Processing me ssage is displayed. T he langu age selection
menu appears.
26 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General