– You must ensure that the safety mechanisms on the server, e.g. stoppers or
retaining systems, are functioning correctly.
– The shape of the rack support uprights must ensure that the support
systems can be bolted to the front.
The support systems have a linear alignment feature to ensure that they can
be adjusted to different rack depths.
– No cable management support (delivered with the mounting kit).
– Climatic conditions: An unobstructed air intake in the rack front and air
discharge in the rear cover of the rack are essential for ventilation of the
installed server.
In general, the ventilation concept ensures that the necessary cooling is
achieved by the horizontal self-ventilation of the installed devices (air flow
from the front to the rear).
– Power supply: For installation in third party racks, you must ensure that the
appropriate socket strips are present.
5.2.2 Mounting the server into the rack
I For information on mounting the server in the rack please refer to the
mounting instructions provided with the Rack Mounting Kit. Further
information you can find in the manual of your rack system.
To Next Page
Loading...
Need help?
General