22
■ Scanning documents
Operation
1. Make sure that the "ScanSnap Manager" icon is displayed on the Dock menu.
2. Load the document onto the scanner.
Refer to "3.2 Scanning Different Document Types" (page 27) and "3.3 Loading Documents"
(page 29).
3. Press ([SCAN] button).
⇒ This starts the scanning.
HINT
If the "ScanSnap Manager" icon is not displayed, from the Finder, select the
installed destination of ScanSnap (generally, "Applications" - "ScanSnap") -
"ScanSnap Manager" to start up "ScanSnap Manager".
Generally, as the icon is registered as a Startup Item in the Mac system during
installation, it appears in the Dock menu when the Mac OS starts.
If "ScanSnap Manager" is not registered as a Startup Item in [System
Preferences], follow the method below to configure it.
1. On Mac OS X v10.2, from the "System Preferences" item, you can register
again by choosing "Login Options" - "Add" - "ScanSnap Manager".
2. On Mac OS X v10.3 or v10.4, from the "System Preferences" item, you can
register again by choosing "Accounts" - "My Account" - "Login Items (Mac OS
X v10.4) / Startup Items (Mac OS X v10.3)" - "+" - "ScanSnap Manager".
HINT
• By default documents are scanned with the "Duplex" mode when you press
the [SCAN] button. With "ScanSnap Manager", you can change that to "Sim-
plex" mode.
• You can also start the scanning from the ScanSnap Manager icon on
the Dock menu.
Refer to "3.4 Changing Scan Settings" (page 32) for more details.
SCAN
To Next Page
Loading...
Need help?
General